Discussion:
Profile Definition Editor doesn't show up
(too old to reply)
Ichad
2006-06-01 19:46:02 UTC
Permalink
Hi all,

I tried to install the CS 2007 RC in a new virtual image..
It installed OK, including Starter Site.

When I tried to open Profile Definition from CS Manager to add new
properties for UserObject, It didn't load the editor. What was shown on the
screen was text "Loading Editor", but the editor itself never shows up.
It supposed to give me page with Properties menus such as General Info,
AccountInfo, ProfileSystem where I can then expand them to view the profile's
field and do update.

It also didn't work when I tried to view other profile objects.

I'm just wondering what's happening here.. I re-ran the installation to
Repair mode, but to no avail.

Can any one give me a clue on what's missing here..

Thank's
David Hargis [MSFT]
2006-06-02 21:15:57 UTC
Permalink
The most likely problem is your local intranet security settings. Open
your internet options in ID and try setting the local intranet zone to
medium-low security. This is needed because the editor uses ActiveX
controls to edit the profile schema.

Thanks,
David
--------------------
Thread-Topic: Profile Definition Editor doesn't show up
thread-index: AcaFtANM98wmZmvPT/GFE8X+4LY69A==
X-WBNR-Posting-Host: 67.96.209.70
From: =?Utf-8?B?SWNoYWQ=?= <***@discussions.microsoft.com>
Subject: Profile Definition Editor doesn't show up
Date: Thu, 1 Jun 2006 12:46:02 -0700
Lines: 22
Message-ID: <EFAD1398-07F7-4EEF-8272-***@microsoft.com>
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.1830
Newsgroups: microsoft.public.commerceserver.userprofilemgt
Path: TK2MSFTNGXA01.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl
microsoft.public.commerceserver.userprofilemgt:3556
NNTP-Posting-Host: TK2MSFTNGXA01.phx.gbl 10.40.2.250
X-Tomcat-NG: microsoft.public.commerceserver.userprofilemgt

Hi all,

I tried to install the CS 2007 RC in a new virtual image..
It installed OK, including Starter Site.

When I tried to open Profile Definition from CS Manager to add new
properties for UserObject, It didn't load the editor. What was shown on the
screen was text "Loading Editor", but the editor itself never shows up.
It supposed to give me page with Properties menus such as General Info,
AccountInfo, ProfileSystem where I can then expand them to view the
profile's
field and do update.

It also didn't work when I tried to view other profile objects.

I'm just wondering what's happening here.. I re-ran the installation to
Repair mode, but to no avail.

Can any one give me a clue on what's missing here..

Thank's
--
This posting is provided "AS IS" with no warranties, and confers no rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm

Note: For the benefit of the community-at-large, all responses to this
message are best directed to the newsgroup/thread from which they
originated.
Ichad
2006-06-02 22:14:01 UTC
Permalink
Thank's David..

I've solved the problem now with your help..
Post by David Hargis [MSFT]
The most likely problem is your local intranet security settings. Open
your internet options in ID and try setting the local intranet zone to
medium-low security. This is needed because the editor uses ActiveX
controls to edit the profile schema.
Thanks,
David
--------------------
Thread-Topic: Profile Definition Editor doesn't show up
thread-index: AcaFtANM98wmZmvPT/GFE8X+4LY69A==
X-WBNR-Posting-Host: 67.96.209.70
Subject: Profile Definition Editor doesn't show up
Date: Thu, 1 Jun 2006 12:46:02 -0700
Lines: 22
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.1830
Newsgroups: microsoft.public.commerceserver.userprofilemgt
Path: TK2MSFTNGXA01.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl
microsoft.public.commerceserver.userprofilemgt:3556
NNTP-Posting-Host: TK2MSFTNGXA01.phx.gbl 10.40.2.250
X-Tomcat-NG: microsoft.public.commerceserver.userprofilemgt
Hi all,
I tried to install the CS 2007 RC in a new virtual image..
It installed OK, including Starter Site.
When I tried to open Profile Definition from CS Manager to add new
properties for UserObject, It didn't load the editor. What was shown on the
screen was text "Loading Editor", but the editor itself never shows up.
It supposed to give me page with Properties menus such as General Info,
AccountInfo, ProfileSystem where I can then expand them to view the profile's
field and do update.
It also didn't work when I tried to view other profile objects.
I'm just wondering what's happening here.. I re-ran the installation to
Repair mode, but to no avail.
Can any one give me a clue on what's missing here..
Thank's
--
This posting is provided "AS IS" with no warranties, and confers no rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm
Note: For the benefit of the community-at-large, all responses to this
message are best directed to the newsgroup/thread from which they
originated
Sivasubramanian Ganesan
2006-06-07 06:05:01 UTC
Permalink
Hi all
I checked the IE Security settings and found that it is as suggested. But
still I am not able to veiw the contents in the profile editor. Can you
please suggest any other steps.
--
G.Shiva
Post by David Hargis [MSFT]
The most likely problem is your local intranet security settings. Open
your internet options in ID and try setting the local intranet zone to
medium-low security. This is needed because the editor uses ActiveX
controls to edit the profile schema.
Thanks,
David
--------------------
Thread-Topic: Profile Definition Editor doesn't show up
thread-index: AcaFtANM98wmZmvPT/GFE8X+4LY69A==
X-WBNR-Posting-Host: 67.96.209.70
Subject: Profile Definition Editor doesn't show up
Date: Thu, 1 Jun 2006 12:46:02 -0700
Lines: 22
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.1830
Newsgroups: microsoft.public.commerceserver.userprofilemgt
Path: TK2MSFTNGXA01.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl
microsoft.public.commerceserver.userprofilemgt:3556
NNTP-Posting-Host: TK2MSFTNGXA01.phx.gbl 10.40.2.250
X-Tomcat-NG: microsoft.public.commerceserver.userprofilemgt
Hi all,
I tried to install the CS 2007 RC in a new virtual image..
It installed OK, including Starter Site.
When I tried to open Profile Definition from CS Manager to add new
properties for UserObject, It didn't load the editor. What was shown on the
screen was text "Loading Editor", but the editor itself never shows up.
It supposed to give me page with Properties menus such as General Info,
AccountInfo, ProfileSystem where I can then expand them to view the profile's
field and do update.
It also didn't work when I tried to view other profile objects.
I'm just wondering what's happening here.. I re-ran the installation to
Repair mode, but to no avail.
Can any one give me a clue on what's missing here..
Thank's
--
This posting is provided "AS IS" with no warranties, and confers no rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm
Note: For the benefit of the community-at-large, all responses to this
message are best directed to the newsgroup/thread from which they
originated
Sivasubramanian Ganesan
2006-06-12 06:29:02 UTC
Permalink
Does anyone has a solution to it?
--
G.Shiva
Post by Ichad
Hi all
I checked the IE Security settings and found that it is as suggested. But
still I am not able to veiw the contents in the profile editor. Can you
please suggest any other steps.
--
G.Shiva
Post by David Hargis [MSFT]
The most likely problem is your local intranet security settings. Open
your internet options in ID and try setting the local intranet zone to
medium-low security. This is needed because the editor uses ActiveX
controls to edit the profile schema.
Thanks,
David
--------------------
Thread-Topic: Profile Definition Editor doesn't show up
thread-index: AcaFtANM98wmZmvPT/GFE8X+4LY69A==
X-WBNR-Posting-Host: 67.96.209.70
Subject: Profile Definition Editor doesn't show up
Date: Thu, 1 Jun 2006 12:46:02 -0700
Lines: 22
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.1830
Newsgroups: microsoft.public.commerceserver.userprofilemgt
Path: TK2MSFTNGXA01.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl
microsoft.public.commerceserver.userprofilemgt:3556
NNTP-Posting-Host: TK2MSFTNGXA01.phx.gbl 10.40.2.250
X-Tomcat-NG: microsoft.public.commerceserver.userprofilemgt
Hi all,
I tried to install the CS 2007 RC in a new virtual image..
It installed OK, including Starter Site.
When I tried to open Profile Definition from CS Manager to add new
properties for UserObject, It didn't load the editor. What was shown on the
screen was text "Loading Editor", but the editor itself never shows up.
It supposed to give me page with Properties menus such as General Info,
AccountInfo, ProfileSystem where I can then expand them to view the profile's
field and do update.
It also didn't work when I tried to view other profile objects.
I'm just wondering what's happening here.. I re-ran the installation to
Repair mode, but to no avail.
Can any one give me a clue on what's missing here..
Thank's
--
This posting is provided "AS IS" with no warranties, and confers no rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm
Note: For the benefit of the community-at-large, all responses to this
message are best directed to the newsgroup/thread from which they
originated
David Hargis [MSFT]
2006-06-12 22:30:51 UTC
Permalink
You could also check you local IIS settings. The web application hosting
the profile editor should be located at http://localhost/Widgets. Try
opening IIS Manager and checking the settings for this Directory. For
things to work properly, this should map to the physical directory
"C:\Program Files\Common Files\Microsoft Shared\Enterprise Servers\Commerce
Server\Widgets" (or similar), and only integrated windows authentication
should be allowed (be sure that anonymous access is not enabled).

- David

--------------------
Thread-Topic: Profile Definition Editor doesn't show up
thread-index: AcaN6X7nwsy5ey7OQ1qRrKNN1TmGMA==
X-WBNR-Posting-Host: 61.8.147.5
From: =?Utf-8?B?U2l2YXN1YnJhbWFuaWFuIEdhbmVzYW4=?= <***@htcindia.com>
References: <EFAD1398-07F7-4EEF-8272-***@microsoft.com>
<S1pD$***@TK2MSFTNGXA01.phx.gbl>
<5477C904-AF71-4AB0-954D-***@microsoft.com>
Subject: RE: Profile Definition Editor doesn't show up
Date: Sun, 11 Jun 2006 23:29:02 -0700
Lines: 86
Message-ID: <7040450C-7B63-42CB-A572-***@microsoft.com>
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.1830
Newsgroups: microsoft.public.commerceserver.userprofilemgt
Path: TK2MSFTNGXA01.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl
microsoft.public.commerceserver.userprofilemgt:3565
NNTP-Posting-Host: TK2MSFTNGXA01.phx.gbl 10.40.2.250
X-Tomcat-NG: microsoft.public.commerceserver.userprofilemgt

Does anyone has a solution to it?
--
G.Shiva
Post by Ichad
Hi all
I checked the IE Security settings and found that it is as suggested. But
still I am not able to veiw the contents in the profile editor. Can you
please suggest any other steps.
--
G.Shiva
Post by David Hargis [MSFT]
The most likely problem is your local intranet security settings. Open
your internet options in ID and try setting the local intranet zone to
medium-low security. This is needed because the editor uses ActiveX
controls to edit the profile schema.
Thanks,
David
--------------------
Thread-Topic: Profile Definition Editor doesn't show up
thread-index: AcaFtANM98wmZmvPT/GFE8X+4LY69A==
X-WBNR-Posting-Host: 67.96.209.70
Subject: Profile Definition Editor doesn't show up
Date: Thu, 1 Jun 2006 12:46:02 -0700
Lines: 22
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.1830
Newsgroups: microsoft.public.commerceserver.userprofilemgt
Path: TK2MSFTNGXA01.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl
microsoft.public.commerceserver.userprofilemgt:3556
NNTP-Posting-Host: TK2MSFTNGXA01.phx.gbl 10.40.2.250
X-Tomcat-NG: microsoft.public.commerceserver.userprofilemgt
Hi all,
I tried to install the CS 2007 RC in a new virtual image..
It installed OK, including Starter Site.
When I tried to open Profile Definition from CS Manager to add new
properties for UserObject, It didn't load the editor. What was shown on the
screen was text "Loading Editor", but the editor itself never shows up.
It supposed to give me page with Properties menus such as General Info,
AccountInfo, ProfileSystem where I can then expand them to view the profile's
field and do update.
It also didn't work when I tried to view other profile objects.
I'm just wondering what's happening here.. I re-ran the installation to
Repair mode, but to no avail.
Can any one give me a clue on what's missing here..
Thank's
--
This posting is provided "AS IS" with no warranties, and confers no rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm
Note: For the benefit of the community-at-large, all responses to this
message are best directed to the newsgroup/thread from which they
originated
--
This posting is provided "AS IS" with no warranties, and confers no rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm

Note: For the benefit of the community-at-large, all responses to this
message are best directed to the newsgroup/thread from which they
originated.
Brent A
2006-06-23 17:50:01 UTC
Permalink
I am having issues with this as well, and nothing stated in this thread
worked for me. I get the "Loading Editor..." text in the CS Manager. It
doesnt ever load anything, and it doesnt throw an exception or time out. Help
is appreciated.

Brent
Post by David Hargis [MSFT]
You could also check you local IIS settings. The web application hosting
the profile editor should be located at http://localhost/Widgets. Try
opening IIS Manager and checking the settings for this Directory. For
things to work properly, this should map to the physical directory
"C:\Program Files\Common Files\Microsoft Shared\Enterprise Servers\Commerce
Server\Widgets" (or similar), and only integrated windows authentication
should be allowed (be sure that anonymous access is not enabled).
- David
--------------------
Thread-Topic: Profile Definition Editor doesn't show up
thread-index: AcaN6X7nwsy5ey7OQ1qRrKNN1TmGMA==
X-WBNR-Posting-Host: 61.8.147.5
Subject: RE: Profile Definition Editor doesn't show up
Date: Sun, 11 Jun 2006 23:29:02 -0700
Lines: 86
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.1830
Newsgroups: microsoft.public.commerceserver.userprofilemgt
Path: TK2MSFTNGXA01.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl
microsoft.public.commerceserver.userprofilemgt:3565
NNTP-Posting-Host: TK2MSFTNGXA01.phx.gbl 10.40.2.250
X-Tomcat-NG: microsoft.public.commerceserver.userprofilemgt
Does anyone has a solution to it?
--
G.Shiva
Post by Ichad
Hi all
I checked the IE Security settings and found that it is as suggested. But
still I am not able to veiw the contents in the profile editor. Can you
please suggest any other steps.
--
G.Shiva
Post by David Hargis [MSFT]
The most likely problem is your local intranet security settings. Open
your internet options in ID and try setting the local intranet zone to
medium-low security. This is needed because the editor uses ActiveX
controls to edit the profile schema.
Thanks,
David
--------------------
Thread-Topic: Profile Definition Editor doesn't show up
thread-index: AcaFtANM98wmZmvPT/GFE8X+4LY69A==
X-WBNR-Posting-Host: 67.96.209.70
Subject: Profile Definition Editor doesn't show up
Date: Thu, 1 Jun 2006 12:46:02 -0700
Lines: 22
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.1830
Newsgroups: microsoft.public.commerceserver.userprofilemgt
Path: TK2MSFTNGXA01.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl
microsoft.public.commerceserver.userprofilemgt:3556
NNTP-Posting-Host: TK2MSFTNGXA01.phx.gbl 10.40.2.250
X-Tomcat-NG: microsoft.public.commerceserver.userprofilemgt
Hi all,
I tried to install the CS 2007 RC in a new virtual image..
It installed OK, including Starter Site.
When I tried to open Profile Definition from CS Manager to add new
properties for UserObject, It didn't load the editor. What was shown on
the
Post by Ichad
Post by David Hargis [MSFT]
screen was text "Loading Editor", but the editor itself never shows up.
It supposed to give me page with Properties menus such as General Info,
AccountInfo, ProfileSystem where I can then expand them to view the profile's
field and do update.
It also didn't work when I tried to view other profile objects.
I'm just wondering what's happening here.. I re-ran the installation
to
Post by Ichad
Post by David Hargis [MSFT]
Repair mode, but to no avail.
Can any one give me a clue on what's missing here..
Thank's
--
This posting is provided "AS IS" with no warranties, and confers no
rights.
Post by Ichad
Post by David Hargis [MSFT]
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm
Note: For the benefit of the community-at-large, all responses to this
message are best directed to the newsgroup/thread from which they
originated
--
This posting is provided "AS IS" with no warranties, and confers no rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm
Note: For the benefit of the community-at-large, all responses to this
message are best directed to the newsgroup/thread from which they
originated
David Hargis [MSFT]
2006-06-27 20:02:04 UTC
Permalink
Do you have MSXML 4.0 SP2 installed? I've seen some bad installations that
can cause the editor to fail to load. You can download the MSI from:

http://msdn.microsoft.com/XML/XMLDownloads/default.aspx

Try repairing the installation if you already have it installed.

- David

--------------------
Thread-Topic: Profile Definition Editor doesn't show up
thread-index: AcaW7XOlPruSjuYTSFaLjqxo3VQ2Hg==
X-WBNR-Posting-Host: 168.215.59.254
From: =?Utf-8?B?QnJlbnQgQQ==?= <Brent ***@discussions.microsoft.com>
References: <EFAD1398-07F7-4EEF-8272-***@microsoft.com>
<S1pD$***@TK2MSFTNGXA01.phx.gbl>
<5477C904-AF71-4AB0-954D-***@microsoft.com>
<7040450C-7B63-42CB-A572-***@microsoft.com>
<8$wRg$***@TK2MSFTNGXA01.phx.gbl>
Subject: RE: Profile Definition Editor doesn't show up
Date: Fri, 23 Jun 2006 10:50:01 -0700
Lines: 149
Message-ID: <8FB754D9-3875-487B-B921-***@microsoft.com>
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.1830
Newsgroups: microsoft.public.commerceserver.userprofilemgt
Path: TK2MSFTNGXA01.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl
microsoft.public.commerceserver.userprofilemgt:3578
NNTP-Posting-Host: TK2MSFTNGXA01.phx.gbl 10.40.2.250
X-Tomcat-NG: microsoft.public.commerceserver.userprofilemgt

I am having issues with this as well, and nothing stated in this thread
worked for me. I get the "Loading Editor..." text in the CS Manager. It
doesnt ever load anything, and it doesnt throw an exception or time out.
Help
is appreciated.

Brent
Post by David Hargis [MSFT]
You could also check you local IIS settings. The web application hosting
the profile editor should be located at http://localhost/Widgets. Try
opening IIS Manager and checking the settings for this Directory. For
things to work properly, this should map to the physical directory
"C:\Program Files\Common Files\Microsoft Shared\Enterprise
Servers\Commerce
Post by David Hargis [MSFT]
Server\Widgets" (or similar), and only integrated windows authentication
should be allowed (be sure that anonymous access is not enabled).
- David
--------------------
Thread-Topic: Profile Definition Editor doesn't show up
thread-index: AcaN6X7nwsy5ey7OQ1qRrKNN1TmGMA==
X-WBNR-Posting-Host: 61.8.147.5
Subject: RE: Profile Definition Editor doesn't show up
Date: Sun, 11 Jun 2006 23:29:02 -0700
Lines: 86
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.1830
Newsgroups: microsoft.public.commerceserver.userprofilemgt
Path: TK2MSFTNGXA01.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl
microsoft.public.commerceserver.userprofilemgt:3565
NNTP-Posting-Host: TK2MSFTNGXA01.phx.gbl 10.40.2.250
X-Tomcat-NG: microsoft.public.commerceserver.userprofilemgt
Does anyone has a solution to it?
--
G.Shiva
Post by Ichad
Hi all
I checked the IE Security settings and found that it is as suggested. But
still I am not able to veiw the contents in the profile editor. Can you
please suggest any other steps.
--
G.Shiva
Post by David Hargis [MSFT]
The most likely problem is your local intranet security settings.
Open
Post by David Hargis [MSFT]
Post by Ichad
Post by David Hargis [MSFT]
your internet options in ID and try setting the local intranet zone to
medium-low security. This is needed because the editor uses ActiveX
controls to edit the profile schema.
Thanks,
David
--------------------
Thread-Topic: Profile Definition Editor doesn't show up
thread-index: AcaFtANM98wmZmvPT/GFE8X+4LY69A==
X-WBNR-Posting-Host: 67.96.209.70
Subject: Profile Definition Editor doesn't show up
Date: Thu, 1 Jun 2006 12:46:02 -0700
Lines: 22
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.1830
Newsgroups: microsoft.public.commerceserver.userprofilemgt
Path: TK2MSFTNGXA01.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl
microsoft.public.commerceserver.userprofilemgt:3556
NNTP-Posting-Host: TK2MSFTNGXA01.phx.gbl 10.40.2.250
X-Tomcat-NG: microsoft.public.commerceserver.userprofilemgt
Hi all,
I tried to install the CS 2007 RC in a new virtual image..
It installed OK, including Starter Site.
When I tried to open Profile Definition from CS Manager to add new
properties for UserObject, It didn't load the editor. What was shown on
the
Post by Ichad
Post by David Hargis [MSFT]
screen was text "Loading Editor", but the editor itself never shows up.
It supposed to give me page with Properties menus such as General Info,
AccountInfo, ProfileSystem where I can then expand them to view the profile's
field and do update.
It also didn't work when I tried to view other profile objects.
I'm just wondering what's happening here.. I re-ran the installation
to
Post by Ichad
Post by David Hargis [MSFT]
Repair mode, but to no avail.
Can any one give me a clue on what's missing here..
Thank's
--
This posting is provided "AS IS" with no warranties, and confers no
rights.
Post by Ichad
Post by David Hargis [MSFT]
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm
Note: For the benefit of the community-at-large, all responses to this
message are best directed to the newsgroup/thread from which they
originated
--
This posting is provided "AS IS" with no warranties, and confers no rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm
Note: For the benefit of the community-at-large, all responses to this
message are best directed to the newsgroup/thread from which they
originated
--
This posting is provided "AS IS" with no warranties, and confers no rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm

Note: For the benefit of the community-at-large, all responses to this
message are best directed to the newsgroup/thread from which they
originated.
Brent A
2006-06-29 14:40:02 UTC
Permalink
Did anyone find a resolution to this issue? I am still dealing with the
Loading Editor... with no solution in sight. I have followed the install
guide word for word. There is nothing in any of the event logs that can help.

Thanks,
Brent
Post by David Hargis [MSFT]
Do you have MSXML 4.0 SP2 installed? I've seen some bad installations that
http://msdn.microsoft.com/XML/XMLDownloads/default.aspx
Try repairing the installation if you already have it installed.
- David
--------------------
Thread-Topic: Profile Definition Editor doesn't show up
thread-index: AcaW7XOlPruSjuYTSFaLjqxo3VQ2Hg==
X-WBNR-Posting-Host: 168.215.59.254
Subject: RE: Profile Definition Editor doesn't show up
Date: Fri, 23 Jun 2006 10:50:01 -0700
Lines: 149
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.1830
Newsgroups: microsoft.public.commerceserver.userprofilemgt
Path: TK2MSFTNGXA01.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl
microsoft.public.commerceserver.userprofilemgt:3578
NNTP-Posting-Host: TK2MSFTNGXA01.phx.gbl 10.40.2.250
X-Tomcat-NG: microsoft.public.commerceserver.userprofilemgt
I am having issues with this as well, and nothing stated in this thread
worked for me. I get the "Loading Editor..." text in the CS Manager. It
doesnt ever load anything, and it doesnt throw an exception or time out. Help
is appreciated.
Brent
Post by David Hargis [MSFT]
You could also check you local IIS settings. The web application hosting
the profile editor should be located at http://localhost/Widgets. Try
opening IIS Manager and checking the settings for this Directory. For
things to work properly, this should map to the physical directory
"C:\Program Files\Common Files\Microsoft Shared\Enterprise
Servers\Commerce
Post by David Hargis [MSFT]
Server\Widgets" (or similar), and only integrated windows authentication
should be allowed (be sure that anonymous access is not enabled).
- David
--------------------
Thread-Topic: Profile Definition Editor doesn't show up
thread-index: AcaN6X7nwsy5ey7OQ1qRrKNN1TmGMA==
X-WBNR-Posting-Host: 61.8.147.5
Subject: RE: Profile Definition Editor doesn't show up
Date: Sun, 11 Jun 2006 23:29:02 -0700
Lines: 86
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.1830
Newsgroups: microsoft.public.commerceserver.userprofilemgt
Path: TK2MSFTNGXA01.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl
microsoft.public.commerceserver.userprofilemgt:3565
NNTP-Posting-Host: TK2MSFTNGXA01.phx.gbl 10.40.2.250
X-Tomcat-NG: microsoft.public.commerceserver.userprofilemgt
Does anyone has a solution to it?
--
G.Shiva
Post by Ichad
Hi all
I checked the IE Security settings and found that it is as suggested.
But
Post by David Hargis [MSFT]
Post by Ichad
still I am not able to veiw the contents in the profile editor. Can you
please suggest any other steps.
--
G.Shiva
Post by David Hargis [MSFT]
The most likely problem is your local intranet security settings.
Open
Post by David Hargis [MSFT]
Post by Ichad
Post by David Hargis [MSFT]
your internet options in ID and try setting the local intranet zone
to
Post by David Hargis [MSFT]
Post by Ichad
Post by David Hargis [MSFT]
medium-low security. This is needed because the editor uses ActiveX
controls to edit the profile schema.
Thanks,
David
--------------------
Thread-Topic: Profile Definition Editor doesn't show up
thread-index: AcaFtANM98wmZmvPT/GFE8X+4LY69A==
X-WBNR-Posting-Host: 67.96.209.70
Subject: Profile Definition Editor doesn't show up
Date: Thu, 1 Jun 2006 12:46:02 -0700
Lines: 22
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.1830
Newsgroups: microsoft.public.commerceserver.userprofilemgt
Path: TK2MSFTNGXA01.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl
microsoft.public.commerceserver.userprofilemgt:3556
NNTP-Posting-Host: TK2MSFTNGXA01.phx.gbl 10.40.2.250
X-Tomcat-NG: microsoft.public.commerceserver.userprofilemgt
Hi all,
I tried to install the CS 2007 RC in a new virtual image..
It installed OK, including Starter Site.
When I tried to open Profile Definition from CS Manager to add new
properties for UserObject, It didn't load the editor. What was shown
on
Post by David Hargis [MSFT]
the
Post by Ichad
Post by David Hargis [MSFT]
screen was text "Loading Editor", but the editor itself never shows
up.
Post by David Hargis [MSFT]
Post by Ichad
Post by David Hargis [MSFT]
It supposed to give me page with Properties menus such as General
Info,
Post by David Hargis [MSFT]
Post by Ichad
Post by David Hargis [MSFT]
AccountInfo, ProfileSystem where I can then expand them to view the profile's
field and do update.
It also didn't work when I tried to view other profile objects.
I'm just wondering what's happening here.. I re-ran the installation
to
Post by Ichad
Post by David Hargis [MSFT]
Repair mode, but to no avail.
Can any one give me a clue on what's missing here..
Thank's
--
This posting is provided "AS IS" with no warranties, and confers no
rights.
Post by Ichad
Post by David Hargis [MSFT]
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm
Note: For the benefit of the community-at-large, all responses to
this
Post by David Hargis [MSFT]
Post by Ichad
Post by David Hargis [MSFT]
message are best directed to the newsgroup/thread from which they
originated
--
This posting is provided "AS IS" with no warranties, and confers no
rights.
Post by David Hargis [MSFT]
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm
Note: For the benefit of the community-at-large, all responses to this
message are best directed to the newsgroup/thread from which they
originated
--
This posting is provided "AS IS" with no warranties, and confers no rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm
Note: For the benefit of the community-at-large, all responses to this
message are best directed to the newsgroup/thread from which they
originated
Sivasubramanian Ganesan
2006-07-31 04:52:01 UTC
Permalink
All
This problem is still persisting. I have even tried with Commerce Server
2007 Developer Edition which was released last week and the problem remains
the same.

All the options, i.e.
(1) IE Settings
(2) XML Parser Service pack
(3) Setting Integrated Windows Autentication to Widgets Virtual Directory in
IIS

are tried and there is no solution to the issue.
--
G.Shiva
Post by Brent A
Did anyone find a resolution to this issue? I am still dealing with the
Loading Editor... with no solution in sight. I have followed the install
guide word for word. There is nothing in any of the event logs that can help.
Thanks,
Brent
Post by David Hargis [MSFT]
Do you have MSXML 4.0 SP2 installed? I've seen some bad installations that
http://msdn.microsoft.com/XML/XMLDownloads/default.aspx
Try repairing the installation if you already have it installed.
- David
--------------------
Thread-Topic: Profile Definition Editor doesn't show up
thread-index: AcaW7XOlPruSjuYTSFaLjqxo3VQ2Hg==
X-WBNR-Posting-Host: 168.215.59.254
Subject: RE: Profile Definition Editor doesn't show up
Date: Fri, 23 Jun 2006 10:50:01 -0700
Lines: 149
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.1830
Newsgroups: microsoft.public.commerceserver.userprofilemgt
Path: TK2MSFTNGXA01.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl
microsoft.public.commerceserver.userprofilemgt:3578
NNTP-Posting-Host: TK2MSFTNGXA01.phx.gbl 10.40.2.250
X-Tomcat-NG: microsoft.public.commerceserver.userprofilemgt
I am having issues with this as well, and nothing stated in this thread
worked for me. I get the "Loading Editor..." text in the CS Manager. It
doesnt ever load anything, and it doesnt throw an exception or time out. Help
is appreciated.
Brent
Post by David Hargis [MSFT]
You could also check you local IIS settings. The web application hosting
the profile editor should be located at http://localhost/Widgets. Try
opening IIS Manager and checking the settings for this Directory. For
things to work properly, this should map to the physical directory
"C:\Program Files\Common Files\Microsoft Shared\Enterprise
Servers\Commerce
Post by David Hargis [MSFT]
Server\Widgets" (or similar), and only integrated windows authentication
should be allowed (be sure that anonymous access is not enabled).
- David
--------------------
Thread-Topic: Profile Definition Editor doesn't show up
thread-index: AcaN6X7nwsy5ey7OQ1qRrKNN1TmGMA==
X-WBNR-Posting-Host: 61.8.147.5
Subject: RE: Profile Definition Editor doesn't show up
Date: Sun, 11 Jun 2006 23:29:02 -0700
Lines: 86
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.1830
Newsgroups: microsoft.public.commerceserver.userprofilemgt
Path: TK2MSFTNGXA01.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl
microsoft.public.commerceserver.userprofilemgt:3565
NNTP-Posting-Host: TK2MSFTNGXA01.phx.gbl 10.40.2.250
X-Tomcat-NG: microsoft.public.commerceserver.userprofilemgt
Does anyone has a solution to it?
--
G.Shiva
Post by Ichad
Hi all
I checked the IE Security settings and found that it is as suggested.
But
Post by David Hargis [MSFT]
Post by Ichad
still I am not able to veiw the contents in the profile editor. Can you
please suggest any other steps.
--
G.Shiva
Post by David Hargis [MSFT]
The most likely problem is your local intranet security settings.
Open
Post by David Hargis [MSFT]
Post by Ichad
Post by David Hargis [MSFT]
your internet options in ID and try setting the local intranet zone
to
Post by David Hargis [MSFT]
Post by Ichad
Post by David Hargis [MSFT]
medium-low security. This is needed because the editor uses ActiveX
controls to edit the profile schema.
Thanks,
David
--------------------
Thread-Topic: Profile Definition Editor doesn't show up
thread-index: AcaFtANM98wmZmvPT/GFE8X+4LY69A==
X-WBNR-Posting-Host: 67.96.209.70
Subject: Profile Definition Editor doesn't show up
Date: Thu, 1 Jun 2006 12:46:02 -0700
Lines: 22
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.1830
Newsgroups: microsoft.public.commerceserver.userprofilemgt
Path: TK2MSFTNGXA01.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl
microsoft.public.commerceserver.userprofilemgt:3556
NNTP-Posting-Host: TK2MSFTNGXA01.phx.gbl 10.40.2.250
X-Tomcat-NG: microsoft.public.commerceserver.userprofilemgt
Hi all,
I tried to install the CS 2007 RC in a new virtual image..
It installed OK, including Starter Site.
When I tried to open Profile Definition from CS Manager to add new
properties for UserObject, It didn't load the editor. What was shown
on
Post by David Hargis [MSFT]
the
Post by Ichad
Post by David Hargis [MSFT]
screen was text "Loading Editor", but the editor itself never shows
up.
Post by David Hargis [MSFT]
Post by Ichad
Post by David Hargis [MSFT]
It supposed to give me page with Properties menus such as General
Info,
Post by David Hargis [MSFT]
Post by Ichad
Post by David Hargis [MSFT]
AccountInfo, ProfileSystem where I can then expand them to view the
profile's
field and do update.
It also didn't work when I tried to view other profile objects.
I'm just wondering what's happening here.. I re-ran the installation
to
Post by Ichad
Post by David Hargis [MSFT]
Repair mode, but to no avail.
Can any one give me a clue on what's missing here..
Thank's
--
This posting is provided "AS IS" with no warranties, and confers no
rights.
Post by Ichad
Post by David Hargis [MSFT]
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm
Note: For the benefit of the community-at-large, all responses to
this
Post by David Hargis [MSFT]
Post by Ichad
Post by David Hargis [MSFT]
message are best directed to the newsgroup/thread from which they
originated
--
This posting is provided "AS IS" with no warranties, and confers no
rights.
Post by David Hargis [MSFT]
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm
Note: For the benefit of the community-at-large, all responses to this
message are best directed to the newsgroup/thread from which they
originated
--
This posting is provided "AS IS" with no warranties, and confers no rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm
Note: For the benefit of the community-at-large, all responses to this
message are best directed to the newsgroup/thread from which they
originated
EricM
2006-08-02 18:22:36 UTC
Permalink
I too am having the same issue. Yes, I installed the RC but the beta was
installed and then uninstalled completely. I am not getting the profile
definition editor to load up same problem as described above.

I too have tried the list of potential fixes with no luck. I have also
double checked the profileAuthStore.xml file through azman and made sure the
access was set properly, it was. I am at a loss and our project needs
completed.

If there is anyone out there that has some ideas, I am willing to listen.

Thanks,

Eric
Post by Sivasubramanian Ganesan
All
This problem is still persisting. I have even tried with Commerce Server
2007 Developer Edition which was released last week and the problem remains
the same.
All the options, i.e.
(1) IE Settings
(2) XML Parser Service pack
(3) Setting Integrated Windows Autentication to Widgets Virtual Directory in
IIS
are tried and there is no solution to the issue.
--
G.Shiva
EricM
2006-08-02 20:43:34 UTC
Permalink
It turns out that if you have IE Enhanced Security Windows component
installed, this will prohibit you from seeing the profile definitions. go
here: Control Panel -->
Add/Remove Programs --> Windows Components --> IE and click details.
uncheck the two boxes and hit next this will then uninstall. go to run and
type iisreset and then you should be able to see the profile definitions...
Hope this helps...
Post by EricM
I too am having the same issue. Yes, I installed the RC but the beta was
installed and then uninstalled completely. I am not getting the profile
definition editor to load up same problem as described above.
I too have tried the list of potential fixes with no luck. I have also
double checked the profileAuthStore.xml file through azman and made sure the
access was set properly, it was. I am at a loss and our project needs
completed.
If there is anyone out there that has some ideas, I am willing to listen.
Thanks,
Eric
Post by Sivasubramanian Ganesan
All
This problem is still persisting. I have even tried with Commerce Server
2007 Developer Edition which was released last week and the problem remains
the same.
All the options, i.e.
(1) IE Settings
(2) XML Parser Service pack
(3) Setting Integrated Windows Autentication to Widgets Virtual Directory in
IIS
are tried and there is no solution to the issue.
--
G.Shiva
Sivasubramanian Ganesan
2006-08-04 05:26:02 UTC
Permalink
Great!! It worked.

Thanks for all who have put in their efforts in sorting this out.
--
G.Shiva
Post by EricM
It turns out that if you have IE Enhanced Security Windows component
installed, this will prohibit you from seeing the profile definitions. go
here: Control Panel -->
Add/Remove Programs --> Windows Components --> IE and click details.
uncheck the two boxes and hit next this will then uninstall. go to run and
type iisreset and then you should be able to see the profile definitions...
Hope this helps...
Post by EricM
I too am having the same issue. Yes, I installed the RC but the beta was
installed and then uninstalled completely. I am not getting the profile
definition editor to load up same problem as described above.
I too have tried the list of potential fixes with no luck. I have also
double checked the profileAuthStore.xml file through azman and made sure the
access was set properly, it was. I am at a loss and our project needs
completed.
If there is anyone out there that has some ideas, I am willing to listen.
Thanks,
Eric
Post by Sivasubramanian Ganesan
All
This problem is still persisting. I have even tried with Commerce Server
2007 Developer Edition which was released last week and the problem remains
the same.
All the options, i.e.
(1) IE Settings
(2) XML Parser Service pack
(3) Setting Integrated Windows Autentication to Widgets Virtual Directory in
IIS
are tried and there is no solution to the issue.
--
G.Shiva
Loading...